resources

Welcome to our resources section. As a responsible manufacturer we believe it is important that our customers have accessible, up to date information regarding our products. The information contained here will not only assist you when specifying our products, but can also be a valuable after sales tool. Here you will find different forms of supporting information from data sheets, to certification, to videos and finally our FAQ's.

our partner portal

Once you are a registered distributor for Selectrite Hardware, you will receive our Distributor Pack which is everything you need to market and sell our product effectively. To receive this pack, please click on the link below and enter your email to receive the password.

What’s available:

  • Data Sheets

  • Fitting Instructions

  • Images & Videos

  • Brochure

  • Certifications

Resources

FAQs

  • We have extensively tested the MK2 for fire doors to ensure that this product is compliant for use on fire doors. The fire testing results are as follows:

    Timber/Mineral Door Assemblies – full range tested to BS EN 1634-1:2014 for up to 120 minutes integrity and insulation performance.

    Bidirectional: can be mounted either side, regardless of exposure direction.

    Steel Door Assemblies – full range tested to BS EN 1634-1:2014 for up to 240 minutes integrity (and where appropriate insulation performance.)

    Bidirectional: can be mounted either side, regardless of exposure direction.

  • The rebate catch must be fitted to ensure that the 2nd closing door with the rebate block goes beyond the end of the arm on the body, everytime. It acts as a failsafe. If the rebate block is not fitted the CE mark and UL listing will become invalidated and the product will not be suitable for fire doors.

  • Yes, our door coordinators can be used with panic bars however the panic bars have to be positioned correctly to accommodate the door coordinator. We would always encourage getting in contact if you are unsure with any relevant drawings.

  • This will vary depending on the finish you require.. For silver anodised and satin stainless steel finishes we work on a 3-4 day lead time for orders up to 100. Maximum of 10 working days for all other finishes.

Contact us